The Revo High Flow nozzle hit 23.5 mm³/s in independent tests, and the half-watt rule shows the melt zone caps a hotend long before watts do.
7items Tech & Gadgets
Bondtech's INDX hardened nozzles are only HRC 30 to 32
Bondtech INDX hardened nozzles measure HRC 30 to 32, about half the 55 to 60 the word implies. Treat them as long-life brass, not tough tools.
Portal axles bolt onto any 1/10 rig with the Reefs XP199
Reefs XP199 portal axle now sells separately, letting builders bolt 60-degree steering and a second gear reduction onto an existing 1/10 rig.
Redcat's Vertex-10W adds 24mm of track for steadier lines
The Redcat Vertex-10W runs 24mm wider than the standard Vertex-10, adding tip-over stability on off-camber rock while keeping 58 degrees of steering.
Tune the Keychron K10 HE on Linux without vendor software
Configure the Keychron K10 HE on Linux with QMK and VIA. Includes the udev rules that block access, a working keymap and the actuation caveats.
A divorced transfer case sets the Enduro24 Sendero apart
A divorced transfer case sets Element's Enduro24 Sendero apart from every center-skid micro crawler, and the forward motor keeps its front tires down.